Comparative Study of Implicit Newmark-β and Explicit CDM: Time-Step Sensitivity and Accuracy in Nonlinear 2-DOF Quarter-Car Systems

Authors

  • Agung Laksono Yudho State University of Malang Author
  • Kelvin Dwi Wardana State University of Malang Author

DOI:

https://doi.org/10.62710/wpdppx47

Keywords:

Nonlinear quarter-car, Newmark-β, Newton-Raphson, Central difference method, Time-step sensitivity

Abstract

This study examines time-step sensitivity and numerical stability in a nonlinear two-degree-of-freedom (2-DOF) quarter-car system using implicit Newmark-β with Newton–Raphson iterations and the explicit central difference method (CDM). Displacement, velocity, acceleration, numerical error, phase portraits, and spectral radius were evaluated under smooth and rough-road excitations at time steps of 0.003, 0.006, 0.03, and 0.06 s. Larger time steps generally increased response deviations and numerical errors, particularly for CDM. Under rough-road excitation, the RMS acceleration error of the unsprung mass using Newmark-β increased from 1.958 m/s² at Δt = 0.003 s to 27.89 m/s² at Δt = 0.06 s. Newmark-β produced bounded responses over all investigated time steps, whereas CDM diverged at Δt = 0.06 s under smooth-road excitation and at Δt = 0.03 and 0.06 s under rough-road excitation. Spectral radius analysis of the linearized undamped system yielded a theoretical CDM stability boundary of Δt/T ≈ 0.3183 (Δt ≈ 0.0311 s), which does not necessarily guarantee stability in nonlinear simulations. Phase portraits further indicated increasing CDM trajectory distortion at larger time steps. These findings emphasize the importance of appropriate time-step selection in minimizing numerical errors and maintaining stability, particularly for CDM under rough-road excitation.

Downloads

Download data is not yet available.

References

Abdelati, M. H., Mahmoud, K. R. M., Mokbel, E. F. F., Elnasr, G. S., & Youssef, I. M. (2026). Coefficient diagram method-based control of semi-active vehicle suspensions with performance evaluation over circular and trapezoidal speed humps at multiple speeds. Journal of Engineering and Applied Science, 73(7), 1–24. https://doi.org/10.1186/s44147-025-00857-9

Alhayki, E., & Dettmer, W. G. (2024). New implicit time integration schemes for structural dynamics combining high frequency damping and high second order accuracy. Computers and Structures, 305. https://doi.org/10.1016/j.compstruc.2024.107587

Arjoune, T., Markert, B., & Bamer, F. (2022). Non-incremental response evaluation in geometrically nonlinear structural dynamics using a space-time stiffness operator. Computational Mechanics, 70(2), 309–333. https://doi.org/10.1007/s00466-022-02169-8

Bamer, F., Shirafkan, N., Cao, X., Oueslati, A., Stoffel, M., Saxcé, G. De, & Markert, B. (2021). A Newmark space-time formulation in structural dynamics. Computational Mechanics, 67(5), 1331–1348. https://doi.org/10.1007/s00466-021-01989-4

Cao, Z., Yao, J., Jia, Z., & Liang, D. (2022). Transient Response Sensitivity Analysis of Localized Nonlinear Structure Using Direct Differentiation Method. Machines, 10(11). https://doi.org/10.3390/machines10111039

Chang, Y., Zhu, Y., Li, Y., & Wang, M. (2024). Dynamical analysis of a fractional-order nonlinear two-degree-of-freedom vehicle system by incremental harmonic balance method. Journal of Low Frequency Noise, Vibration and Active Control, 43(2), 706–728. https://doi.org/10.1177/14613484231210484

Ebrahimi-nejad, S., Kheybari, M., Vahid, S., & Borujerd, N. (2020). Multi-objective optimization of a sports car suspension system using simplified quarter-car models. Mechanics & Industry, 21(412). https://doi.org/10.1051/meca/2020039

Fallahi, F., & Kedziora, S. (2026). Influence of nonlinear damping and softening stiffness on the dynamic behavior of a two-degree-of-freedom quarter-car model. Mechanics Research Communications, 154(3), 104681. https://doi.org/10.1016/j.mechrescom.2026.104681

Fern, I., Uriarte, H., & Urkullu, G. (2024). A Family of Conditionally Explicit Methods for Second-Order ODEs and DAEs: Application in Multibody Dynamics. Mathematics, 12(2826). https://doi.org/10.3390/math12182862

Fu, B., & Zhang, F. (2022). A dual-explicit model-based integration algorithm with higher-order accuracy for structural dynamics. Applied Mathematical Modelling, 110, 513–541. https://doi.org/10.1016/j.apm.2022.06.005

Hassan, W. M. (2019). Numerical error assessment in nonlinear dynamic analysis of structures. HBRC Journal, 15(1), 1–31. https://doi.org/10.1080/16874048.2019.1619257

International Organization for Standardization. (2016). ISO8608:16 “Mechanical vibration — Road surface profiles — Reporting of measured data.”

Jeon, J., & Song, J. (2025). Neural Network – Augmented Physics Models Using Modal Truncation for Dynamic MDOF Systems under Response-Dependent Forces. Journal of Engineering Mechanics, 151(1), 1–14. https://doi.org/10.1061/JENMDT.EMENG-7845

Ji, J., Lin, Z., Li, S., Song, J., & Du, S. (2024). Coupled Newmark seismic displacement analysis of cohesive soil slopes considering nonlinear soil dynamics and post-slip geometry changes. Computers and Geotechnics, 174. https://doi.org/10.1016/j.compgeo.2024.106628

Ji, Y., & Xing, Y. (2023). Highly Accurate and Efficient Time Integration Methods with Unconditional Stability and Flexible Numerical Dissipation. Mathematics, 11(3). https://doi.org/10.3390/math11030593

Jiang, X., Xu, X., Shi, T., & Atindana, V. A. (2024). Nonlinear Characteristic Analysis of Gas‑Interconnected Quasi‑Zero Stiffness Pneumatic Suspension System: A Theoretical and Experimental Study. Chinese Journal of Mechanical Engineering, 37(58), 1–15. https://doi.org/10.1186/s10033-024-01039-z

Liu, W., Ye, T., Yuan, P., Beer, M., & Tong, X. (2023). An explicit integration method with third-order accuracy for linear and nonlinear dynamic systems. Engineering Structures, 274. https://doi.org/10.1016/j.engstruct.2022.115013

Lu, M. (2022). Efficient Analysis of Stationary Dynamics of Piecewise-Linear Nonlinear Systems Modeled Using General State-Space Representations. Journal of Computational and Nonlinear Dynamics, 17(8), 1–8. https://doi.org/10.1115/1.4054152

Mahdi, M., Anjomshoae, Z., & Shojaee, S. (2024). Towards optimal use of the explicit β1/β2 - Bathe time integration method for linear and nonlinear dynamics. Computers and Structures, 298. https://doi.org/10.1016/j.compstruc.2024.107350

Molla, T., Duraisamy, P., Rajagopal, K., Karthikeyan, A., & Boulaaras, S. (2024). Exploring nonlinearity in quarter car models with an experimental approach to formulating fractional order form and its dynamic analysis. Scientific Reports, 14(12074). https://doi.org/10.1038/s41598-024-63139-z

Nagarkar, M. P., Bhalerao, Y. J., Vikhe Patil, G. J., & Zaware Patil, R. N. (2018). Multi-Objective Optimization of Nonlinear Quarter Car Suspension System - PID and LQR Control. Procedia Manufacturing, 20, 420–427. https://doi.org/10.1016/j.promfg.2018.02.061

Nie, G., Lin, Y., Miao, X., & Tang, Y. (2022). Static and Dynamic Testing of a Nonlinear Molecular Spring of Vehicle Suspension. Instruments and Experimental Techniques, 65(3), 524–530. https://doi.org/10.1134/S0020441222030198

Prasad, P. D., Mitra, R. K., & Gayen, D. (2026). Non-smooth bifurcation structures and chaos control in a quarter-car piecewise-linear suspension system with time-delayed velocity feedback. International Journal of Non-Linear Mechanics, 187. https://doi.org/10.1016/j.ijnonlinmec.2026.105370

Sarkoyeh, H., Hajarizadeh, M. A., & Alaie, S. (2024). Analyzing the Nonlinear Dynamics of the Three Degree of Freedom Frame Structure Based on the Newmark-β Method and the Effect of Stiffness on the Displacement of the Structure. Journal of Civil Engineering Researchers, 6(3), 9–17. https://doi.org/10.61186/JCER.6.3.9

Souza, Y. P., Loureiro, F. S., & Mansur, W. J. (2024). A novel time substep procedure into the classical central difference scheme to derive fourth-order methods in the complex plane. Computers and Structures, 305. https://doi.org/10.1016/j.compstruc.2024.107514

Takács, D. M., & Fülöp, T. (2025). Improving the accuracy of the Newmark method through backward error analysis. Computational Mechanics, 75(5), 1585–1606. https://doi.org/10.1007/s00466-024-02580-3

Thai, S., Thai, H., Vo, T. P., & Nguyen-xuan, H. (2017). Nonlinear static and transient isogeometric analysis of functionally graded microplates based on the modified strain gradient theory. Engineering Structures, 153, 598–612.

Thite, A. N., Coleman, F., Doody, M., & Fisher, N. (2017). Experimentally validated dynamic results of a relaxation-type quarter car suspension with an adjustable damper. Journal of Low Frequency Noise, Vibration and Active Control, 36(2), 148–159. https://doi.org/10.1177/0263092317711989

Watanabe, M., Prasad, A., & Sakai, K. (2024). Delayed feedback active suspension control for chaos in quarter car model with jumping nonlinearity. Chaos, Solitons and Fractals, 186. https://doi.org/10.1016/j.chaos.2024.115236

Wedig, W. V. (2020). Turbulent travel speeds in nonlinear vehicle dynamics. Nonlinear Dynamics, 100(1), 147–158. https://doi.org/10.1007/s11071-020-05545-2

Yang, M., Luo, X., Zhang, X., Ding, H., & Chen, L. (2022). Enhancing suspension vibration reduction by diagonal inerter. Applied Mathematics and Mechanics, 43(10), 1531–1542. https://doi.org/10.1007/s10483-022-2911-9

Published

2026-10-26

How to Cite

Yudho, A. L., & Wardana, K. D. (2026). Comparative Study of Implicit Newmark-β and Explicit CDM: Time-Step Sensitivity and Accuracy in Nonlinear 2-DOF Quarter-Car Systems. Jurnal Ragam Pengabdian, 3(3), 11470-11492. https://doi.org/10.62710/wpdppx47